Sealodeck™

Sealodeck™
- For treated lumber surfaces such as, decks, railings, fences, boat decks, walkways and wooden shingles.

Sealodeck™ has the following
advantages:
- Waterborne
- Non toxic
- Easy to apply
- Easy wash up of tools
- Salt spray resistant
- VOC compliant
- Highly ultraviolet resistant
- Protects wood from ultraviolet attack
- Mildew resistant

Surfaces must be sound, dry, clean, and free from mildew, fungal growth or algae. This may be achieved by power washing or washing with a mild solution of sodium hypochlorite such as a chlorine bleach or a combination or both. All surface repairs should be completed prior to application.

Stir or shake contents of pail well before using. Apply Sealodeck™ Transparent Waterproofer & UV Protector for Wood by brush, nap roller or low pressure spray. Apply product to fully saturate the wood surface. Evenly distribute and spread small pockets of standing liquid by roller or brush. Allow to dry. Apply a second coat.

Wash equipment with water immediately after use. Cured Sealodeck™ may be removed with Quickclean™ available from Sealoflex Inc.

Do not apply at temperatures below +45˚F.

For this and/or related products, please refer to individual product data sheets, System Application Guides, Products MSDS, Primer Chart, Fabric Chart.

Approximately 100 sq.ft. per gallon for both coats.
Two coats are required for optimum protection.
Do not over apply. Do not allow to puddle.

Sealodeck™ Transparent Waterproofer is not recommended for surfaces painted with latex, oil based enamel paint, or surfaces to be painted.