Primary links

Sealodrain™ 200, 500 650 & 650L

Soil Sheet Drain and Protection Board

Two-part pre-fabricated soil drain sheet and protection board consisting of a formed polystyrene core covered on one side with a non-woven, needle-punched polypropylene filter fabric.  The fabric allows water to pass into the drain core while restricting the movement of soil particles, which might clog the core.  The core allows water flow to designed exits.

Uses

Sealodrain 200 is Designed Primarily For:
Vertical Installations requiring high compressive strength and where high flow capacity is required.  Use is suitable in selected horizontal applications.

Sealodrain 500 is Designed Primarily For:
Vertical installations requiring high compressive strength and where high flow capacity is required.  Use is suitable in selected horizontal applications.

Sealodrain 650 is Designed Primarily For:
Horizontal installations requiring high compressive strength, high flow capacity and the strength and filtration properties of a woven geotextile.

Sealodrain 650L is Designed Primarily For:
Horizontal installations requiring high compressive strength, high flow capacity and the strength and filtration properties of a woven geotextile. Laminated to the back of the dimple board is an additional non-woven polypropylene fabric designed to accept the Sealoflex CT™ waterproofing system.

Important Notes

All information, drawings and specifications are based on the latest product information available at this time. Constant improvement and engineering progress make it necessary that we reserve the right to make changes without notice. All physical properties are typical values. Standard variations in mechanical properties of 10% and in hydraulic properties of 20% are normal.
For this and/or related products, please refer to individual product data sheets, System Application Guides, Products MSDS, PrimerChart, Fabric Chart.

Technical Data

Product Properties:

Property:

Sealodrain
200:

Sealodrain
500:

Sealodrain 650:

Sealodrain
650L:

Flow Capacity per
Unit With (ASTM D4716):

9 gpm

16 gpm

18 gpm

18 gpm

Roll Length:

50 ft.

50 ft.

50 ft.

50 ft.

Roll Width:

4 ft.

4 ft.

4 ft.

4 ft.

Roll Weight:

57 lbs.

80 lbs.

95 lbs.

99 lbs.



Fabric Properties (Sealodrain 200, 500 and 650):

Property:

Characteristic:

Material :

Polypropylene

Grab Tensile Strength:
(ASTM D4632)

110 lbs.

Puncture Strength:
(ASTM D4833)

65 lbs.

Trapezoidal Tear:
(ASTM D4533)

50 lbs.

Mullen Burst Strength:
(ASTM D43786)

215 psi

Elongation at Break:
(ASTM D4632)

60%.

AOS:
(ASTM D4751)

100 sieve

Permittivity:
(ASTM D4491)

1.6 sec ¯¹

Permeability:
(ASTM D4491)

0.3 cm/sec

Flow Rate:
(ASTM D4491)

150 gpm/sq. ft.



Core Properties:

Property:

Sealodrain 200:

Sealodrain 500:

Sealodrain 650:

Sealodrain 650L:

Material :

Polystyrene

Polystyrene

Polystyrene

Polystyrene

Thickness:

1/4 inch

7/16 inch

7/16 inch

7/16 inch

Compressive Strength:
(ASTM D1621 Mod.)

10,800
lbs./sq. ft.

15,000
lbs./sq. ft.

21,000
lbs./sq. ft.

21,000
lbs./sq. ft.