Quickclean™

Quickclean™ will remove most paints, asphalt, oil and grease from most surfaces and specifically will:
• Clean paint brushes which have had paint set up in the bristles
• Remove Sealoflex and other paint coating products from clothing
• Remove paint or asphalt spills from concrete, masonry or wood surfaces
• Clean spray equipment and other equipment used for applying paint or paint related products.

Quickclean™ has the following advantages:
• Dissolves paint, oil and asphalt products to be removed and then allows water wash up. This eliminates the need to rinse with more solvents which reduces cost and damage to the environment
• Equipment to be cleaned simply needs to be immersed in Quickclean for a few hours and rinsed off with water

For cleaning of brushes or hand tools simply immerse the equipment in Quickclean™ overnight and rinse with water. For removing paint or asphalt from clothing, soak the stained area of the clothing in Quickclean™ for several minutes until the stain dissolves then rinse with clean water and wash in the regular way.
For removal of stains from concrete, apply Quickclean™ to the stained area and allow to sit for several minutes until stains dissolve then follow with pressure washing or garden hose if pressure washer is unavailable. If stains persist, repeat process.
For cleaning spray equipment fill the equipment with Quickclean™ making sure the paint conduits and other paint containing vessels are also filled with Quickclean™. Allow to sit until paint is dissolved and flush machine with clean water.

Read the MSDS sheet on Quickclean™ carefully before use. Avoid contact with eyes and skin. If eyes become contaminated flush with water for at least 15 minutes. If ingested do not induce vomiting and seek medical attention immediately. Use only in well ventilated areas and avoid inhaling vapors. Use of NIOSH approved respirators is recommended. Avoid contact with sparks, open flame, motors and heat as Quickclean™ is FLAMMABLE.

Quickclean™ will not remove polyurethane products once they have cured.  Before curing has taken place Quickclean ™ will function as usual.  Do not attempt to remove stains from painted surfaces as Quickclean™ will damage these surfaces. Should the surfaces be expected to resist attack first test the surface to be cleaned to confirm resistance to attack.

For this and all related products:  Please refer to individual product data sheets, product MSDSs, System Application Guides, Primer Chart and Fabric Chart.